Loading... Please wait...
All prices are in SGD Currency conversions on the site are for guidance only. All sales are in SGD.
Menu

Blog

Posted by

We have been using 3D printing for some time to help with new product development and for mastering resin parts. Recently we started offering 3D printed missiles for sale. The advantage of this manufacturing method is that it is not necessary to assemble fine details - they can be printed right in place. The first missile was the Matra R.550 Magic, and we will follow this with the Israeli Shafrir II and the French Matra R.530K.

How to use 3D printed parts

Using 3D printed parts is different from standard polystyrene plastic or polyurethane resin. When the parts are printed, they are supported by a wax structure. The wax residue needs to be removed before use.

Before packaging the parts we clean them ultrasonically in a solvent and inspect them for visual defects. The cleaning should remove the wax, but there is a chance some remains. We therefore recommend cleaning them before you use them. Isopropyl aolcohol (rubbing alcohol or isonol) is usually good.

The parts will have fine strata lines from the print process. These can be reduced by spraying with Mr Surfacer 100 or 1200 and gentle sanding. For some reason other spray primers don't work as well.

How are 3D parts made?

The development process for 3D parts is quite straight forward.  We draw the part in a 3D CAD program, then convert it to a "mesh" that describes the surface.  This mesh must not have any holes in it and there are minimum thicknesses or there will be printing problems.

The minimum thickness for the printers we use is about 0.3 mm.  Certain details can be smaller but we have found that these can be damaged in the clean up process.

Our parts are printed in UV cured acrylic on a 3D Systems ProJet 3500 printer.  These printers are significantly more capable - and more expensive - than the hobbyist or home printers.



Why do we sell some parts in resin and some 3D printed?

Polyurethane resin is an affordable way to replicate complex shapes with undercut areas.  These cannot often be done by injection moulding because the moulding machine needs to be able to eject the part.  However, PU resin parts can be difficult to mould without leaving seams or breaking the part down into a number of sub-assemblies.

3D printing allows undercuts and removes the need for a mould.  This is very suitable for fine, complex parts.  The down side is that set up costs and unit production costs are much higher than PU resin.

We have seen cost of printing decrease and the capability of the printers improve significantly in the last five years. This trend will definitely continue. 

View Comments


Mirage 5 Nose Variants

When we were doing the research for the Mirage IIIE/5/50 kits we identified over 100 different variants.  As the prototype Mirage I flew in 1955 and the last new build Mirage 50C was delivered in 1982 this is not surprising.Our Mirage kits include a number of different nose options which make it very flexible for [...]

Read More »


High Planes New Tool 1:72 Dassault Mirage III

    We are pleased to advise that the all new tool 1:72 Mirage III series is nearing completion! This all new tool will be released in three versions: 72016 Dassault Mirage IIIO RAAF Mirage IIIO with three decal options. 72071 IAI Dagger A Argentine Air Force (Fuerza Aérea Argentina) Dagger with three decal options for aircraft from the Falklands War (Guerra [...]

Read More »


High Planes Models Acquisition

We are pleased to advise High Planes Models whas been acquired by HPM Hobbies.  High Planes Models has an excellent reputation for producing highy accurate kits of neglected subjects, and we are looking forward to building on this base. The change of ownership will unavoidably mean some disruption but we are working hard to miminise this. [...]

Read More »